All products

NTC thermistor 10K for temperature measurement with ring lug

NTC thermistor 10K for temperature measurement with copper cylindrical probe

Converts AC 0-300V input voltage into a load independent output signal DC 0-10V. Can be used for monitoring the voltage in electricity network and with the 0-10V can be easily interfaced to our modules analog inputs. The voltage transducer features total galvanic isolation between input/output, high accuracy, low drifting by temperature, and wide temperature operational range.

smartDEN Notifier is an Ethernet input module that can be used in a wide range of remote monitoring, measurement, data-acquisition, security and alert notification applications. Thank to its multi-channel design (16 digital, 8 analog and 8 thermistor inputs) this device can perform simultaneously a variety of measurements, for example temperature, humidity, light, pressure, voltage, current etc. The Web interface allows users to configure the smartDEN Notifier, as well as to monitor current measurements. Supported by DRMv3 Software. Along with the current measurements can be downloaded from a remote IP host in XML/JSON format, smartDEN Notifier is capable to send alerts and notifications via MQTT protocol and e-Mail. Works with Home Assistant, Domoticz and OpenHAB home automation systems as well as with Node-RED IoT platform.

A waterproofed version of DS18B20 digital thermometer which provides 9-12 bits Celsius temperature measurements. The DS18B20 communicates over a 1 - Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. Usable with 3.0-5.5V systems. The cable is jacketed in PVC so we suggest keeping it under 100 degree C.

RF Remote for smartDEN Opener

smartDEN IP-Maxi is an Ethernet module (IP controller) that can be used in a wide range of remote sensors monitoring, home automation control, environmental monitoring and data-acquisition applications. Thank to its multi-channel design (8 digital inputs, 4 analog inputs, 4 temperature inputs, 8 SPDT relays and 2 analog outputs) this device can perform simultaneously a variety of measurement and control functions. The Web interface allows users to configure the smartDEN IP-Maxi, as well as to monitor/control input/output channels. Supported by DRMv3 Software. smartDEN IP-Maxi provides both SNMP and XML/JSON interface for integration with third-party developed applications. Works with Home Assistant, Domoticz and OpenHAB home automation systems as well as with Node-RED IoT platform.

smartDEN Opener is a relay controller which provides motor control for garage doors, barriers, awnings, windows, blinds, roulette shutters. It can be opened/closed via RF 433 MHz pocket remotes but also provides Wi-Fi wireless interface for control from mobile smartphone, tablet or computer.

The android app DAE-aModules (iOS app support is comming soon) ensure secure communication with the controller, easy monitoring of the extra relays/sensors, receiving event notifications (for example when and who opened the door lastly) and even control the door via GPS location (for example when approaching your garage door driving your car).

The controller has and several additional I/O lines for extra buttons, switches, contact or barrier detectors, anti-freezing temperature (or other) sensors and two extra relays for warning lamps, heaters or door locks. An email can be sent to one user email address upon triggered event and the internal memory keeps small amount of log records for the previous 300 events.

For system integrators we provide two communication protocols (MQTT and HTTP/XML/JSON) for embedding in third party systems (such as home automation servers like Home Assistant, Domoticz, Openhab and Node-RED) and lot of software examples.

A waterproofed version of DS18B20 digital thermometer which provides 9-12 bits Celsius temperature measurements. The DS18B20 communicates over a 1 - Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. Usable with 3.0-5.5V systems. The cable is jacketed in PVC so we suggest keeping it under 100 degree C.

Plastic pipes supplied with the corresponding gaskets and nuts. Designed to provide necessary IP code on the points where conductors pass through the walls of the electric distribution boxes. All cable gland elements are made of high quality plastic (PE) and rubber.