Sensors

The DS18S20 digital thermometer provides 9 - bit Celsius temperature measurements and has an alarm function with nonvolatile user - programmable upper and lower trigger points. The DS18S20 communicates over a 1 - Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor.

TSL250R light to voltage optical sensor, photodiode, supply range: 2.7 - 5.5V DC

Humidity near linear voltage output sensor HIH-4000-02

Temperature sensor; - 40...+ 100 C

GP2Y0A21YK is infrared proximity sensor made by Sharp. It has analog output from 3.1V at 10cm to 0.4V at 80cm which make it suitable for using along with our modules

GP2Y0A02YK0F is infrared proximity sensor made by Sharp. It has analog output from 2.8V at 15cm to 0.4V at 150cm which make it suitable for using along with our modules

NTC thermistor 10K for temperature measurement with epoxy resin.

A split core current transformer which is able to produce a 0-5V DC signal with an AC primary current (from 5 to 50A selectable). The split core allows the transformer to be clipped on to a wire without disconnecting the primary current carrying wire.

Converts DC input current into a load independent output signal DC 0-10V. Can be used for monitoring the current in motor windings and with the 0-10V can be easily interfaced to our modules analog inputs. The current transducer features total galvanic isolation between input/output, high accuracy, low drifting by temperature, and wide temperature operational range.