USB 16 Relay Module - ModBus RTU, Timers, DIN RAIL BOX
This is USB Relay Module with ModBus RTU protocol support and 16 relays (the type is selectable during purchase). The relays are controlled via PC USB port and it is shown as virtual serial port (virtual com port). It is possible to control directly 220V / 120V devices with your PC usb port up to 15A max. The module supports up to 16 independent timers with min. resolution 100ms. Supported by DRMv3 Software. Works with Home Assistant, OpenHAB home automation systems. There are lot of profesional ModBus software apps for this usb relay board allowing to be easily integrated in any ModBus automation project. Software examples are available as well. This is the DIN RAIL BOX version.
- Brand: Denkovi Assembly Electronics ltd.
- Weight: 0.505 Kgs
- Communication protocol: ModBus RTU;
- Power supply requirements (selectable during purchase):
- 12V DC / 600mA
- 24V DC / 400mA
- 16 SPDT relay channels (the type depends on the stocks quantity in our store):
- 16 independent timers with resolution 100ms;
- Option for loading relays states on boot: last saved, predefined or zeros;
- USB connector: type B
- Converter chipset: FT232RL
- FT232RL optical isolation against communication noises
- Communication: serial USB communication (Virtual Com Port)
- Led-s: Relay Led, Power ON Led, USB ON Led, Rx Led, Tx Led
PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask
Possible to be mounted into Din Rail Box (see options for more details)
Extra PCB openings for better voltage isolation
Doubled high current tracks
DIN RAIL BOX
- Size: W=210mm x L=85mm x H=58mm
- Operating temperature range: from 0 ºC to +80 ºC
- Supported by DRMv3 Software (Windows, Linux, Raspbian) - New
- Supported by Home Assistant home automation software - New;
- Supported by openHAB home automation software;
- Supported by many third parity software like qModMaster, Simply Modbus TCP Client, Modbus Poll, RMMS, ModbusViewTCP, MACH 3, openHAB
- Comes with free configuration/control demo software - download
- Software examples - here
- Documentation - here
- Home Automation
- Industrial Automation
- HVAC (Heating, ventilation and air conditioning)
- BAS (Building Automation Systems)
Relay Module Overview
The relay module is shown like Virtual Com Port
The device will appear in your computer as USB Serial Port
Supported ModBus RTU commands
- Read Coils (0x01)
- Write Single Coil (0x05)
- Write Multiple Coils (0x0F)
- Write Single Holding Register (0x06)
- Read Multiple Holding Registers (0x03)
- Write Multiple Holding Registers (0x10)
- Report Slave ID (0x11)
Access from Home Assistant
Access from OpenHAB
OpenHAB is a third party open source free home automation software.
Access via software DRMv3
This device is supported by DRMv3 Software.
The device can be found in the device list under the default name: USB 16 Relay Modbus RTU
Control from Denkovi ModBus Tool
This is free software for easy configuration/monitoring/control the USB 16 Relay Module ModBus RTU.
Control from Windows
- Home Assistant - This device is supported by Home Assistant. For more information - please follow this article.
- openHAB - This device is supported by the powerful home automation system openHAB. Please take a look at our application note for more information. You can also download the configuration files for openHAB (ver 2.2.0) for communication via Modbus binding example.
- Windows Software - qModMaster, Simply Modbus TCP Client, Modbus Poll, RMMS, ModbusViewTCP, MACH 3
- .NET (C#) - examples with set and get relays status