Easy Home Control KIT - 1

Overview

Here we offer you "Easy Home Control KIT - 1" consisting of 1 x USB Four Channel SPDT Relay Board, 1 x USB One Wire Converter, 4 x DS18S20 Temperature sensors and License for Windows Home Automation Software. With this KIT, you can organize your very complex home automation process without any special programming skills. This kit basicly is for users which would like to control electrical devices based on temperature values of the sensors or software timers, pulses and schedules. It supports the feature web server, which allows the relays and sensors to be accessed not only from the host PC, but from any mobilde device (Smart Phone and Tablet). The software can plot graphics, send emails if hardware is not found and some other interesting functions are available. Getting this KIT you are receiving automaticaly 15% discount!

The conception of the KIT

The KIT turns your PC in powerful home automation tool.

The KIT includes

1 x Denkovi USB 4 Channel Relay Board
USB port (type B) 4 SPDT Relay channels - selectable by user: JQC-3FC/T73 DC5V (7A / 250VAC, 10A / 125VAC, 12A / 120VAC, 10A / 28VDC) RAS-05-15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC) Fully supplied from the computer USB port   Additional USB 4 Relay Boards can be bought separately from here
1 x Denkovi USB One Wire Converter
USB port (type B) 3 pin output screw terminal (GND, 1 Wire Line, +5V) Chipset: FT232RL and DS2480B ESD line Protection based on DS9503P Emulates the Maxim Dallas DS9097U converter Fully supplied from the computer USB port    Additional Adaptors can be bought separately from here (although usually one is enogh)
4 x DS18S20 temperature sensor
Sensor type: temperature sensor Kind of temperature sensor: digital thermometer IC Temperature measuring range: - 55°C to +125°C ( - 67°F to +257°F) Case: TO92 Temperature measurement accuracy: 0.50% from -10°C to +85°C Datasheet - here   Additional sensors can be bought separately from here
1 x Lanmisoft Home Automation Software license
Low memory and CPU consumption Multi-threaded, does not freezing windows during 1-wire sensors reading process Easy to create the program and set conditions for relays (wizard style), special knowledge  is not required Drag’n’Drop sensors and relays on image which represent automation system Temperature data acquisition with advanced charting options Timer mode (Pulse, Weekly or Delay) Thermostat mode (Normal, Differencial) Switch mode (turn more than one relay at a time) Web server Emails notification during hardware failure Supported by Windows 2000, XP, Vista, 7, 8 Measurement values database storage - MySQL, MSSQL, Local database(default) The demo is here (http://www.lanmisoft.com/Automation/index.html)
2 x USB cable, 5.0m
Type of connection cable: USB - USB Contact plating: gold plated Cable length: 5.0m Cable/adapter structure: USB A plug USB B plug   Additional cables can be bought separately from here The cables are optional, not included by default

When you buy this complete

• You save 15% rather than you order each component separately.
• You take all the stuffs from our web site - we guarantee all the components are tested and in working condition
• The Home Automation Software by Lanmisfot comes with lifetime update feature
• You will receive our support.

Please note that here we offer you only one possible configuration for our hardware + Lanmisoft Sofwtare. However it is possible to be assembled other combination - for example with several USB 4 or USB 8 relay boards and more DS18S20 sensors. Currently the software supports only USB 4 Relay Board and USB 8 Relay Board (up to 96 relays at once). If you need something special, please contact with us.

Please note that this kit can not work without computer.

Instalation instructions

The installation guide may be downloaded from - here 

Some screenshots of the software

Easy drag and drop placement of the sensors and relays over the image representing your Home. Each sensor and relay can be with different name.

Each relay can work in weekly mode with 2 ON/OFF events per day.

Each sensor can be "attached" to one or several relays. Based on its value and the adjusted thresholds (Low/High), the relay will be turned on/off automaticaly. The mode is called "Thermostat".

The relay can work in pulse mode with different on/off times.

Each relay can work in "Switch mode". This means when it is turned other relay can be turned on/off. For example it is possible to simulate DPDT relay while clicking 2 (SPDT) relays at a time.

The software can plot charts based on the masured sensors values.

When some of the hardware components are not available the software can send email.

• 

  USB Four(4) Relay Output Module,Board for Home Automation

  This is Four Channel relay board controlled by computer USB port. The usb relay board is with 4 SPDT relays rated up to 10A each. You may control devices 220V / 120V (up to 4) directly with one such relay unit. It is fully powered by the computer USB port. Suitable for home automation applications, hobby projects, industrial automation. The free software DRM and DRMv3 allows to control relays manually, create timers (weekly and calendar) and multivibrators, use date and time for alarms. We developed also command line tool utility for controlling the relays. We provide software examples in Labview, .NET, Java, Borland C++, Python.

  Price: $26.60

  View details
• 

  DS18S20+ temperature sensor digital thermometer IC, range: - 55 C to +125 C

  The DS18S20 digital thermometer provides 9 - bit Celsius temperature measurements and has an alarm function with nonvolatile user - programmable upper and lower trigger points. The DS18S20 communicates over a 1 - Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor.

  Price: $9.60
• 

  USB to One Wire converter - Virtual Com Port FT232RL based

  This adaptor connects your 1-Wire network to your computer. It appears as Virtual Com Port (VCP) and it is based on the FT232RL (USB-UART converter) and DS2480B Dallas-Maxim (RS232-One Wire converter). It has selectable RC filter for improving communication for lines between 1 and 100 meters and ESD line protection. It is compaitable with DS9097U of Maxim-Dallas with the difference this adaptor is connected to your USB port

  Price: $48.00