Various sensors, accessories and companion products for Denkovi modules
Subcategories
Sensors (34)
Various sensors suitable for our modules. Additional information how to connect them may be found on this link: http://denkovi.com/application-notes
Products
DS18S20+ temperature sensor digital thermometer IC, range: - 55 C to +125 CThe DS18S20 digital thermometer provides 9 - bit Celsius temperature measurements and has an alarm function with nonvolatile user - programmable upper and lower trigger points. The DS18S20 communicates over a 1 - Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. |
Price:
$9.60
|
|
TSL250R light to voltage sensorTSL250R light to voltage optical sensor, photodiode, supply range: 2.7 - 5.5V DC |
Price:
$12.40
|
|
HIH-4000-02 humidity sensor, range:0÷100% RHHumidity near linear voltage output sensor HIH-4000-02 |
Price:
$37.00
|
|
LM335Z - temperature sensor, range: -40÷100 CTemperature sensor; - 40...+ 100 C |
Price:
$4.20
|
|
Infrared Proximity Distance Sensor - Sharp GP2Y0A21YK, 10-80cmGP2Y0A21YK is infrared proximity sensor made by Sharp. It has analog output from 3.1V at 10cm to 0.4V at 80cm which make it suitable for using along with our modules |
Price:
$21.70
|
|
Infrared Proximity Distance Sensor - Sharp GP2Y0A02YK0F, 20-150cmGP2Y0A02YK0F is infrared proximity sensor made by Sharp. It has analog output from 2.8V at 15cm to 0.4V at 150cm which make it suitable for using along with our modules |
Price:
$32.80
|
|
NTC Sensor 10K EPCOS (TDK) B57500M103A005 - Epoxy ResinNTC thermistor 10K for temperature measurement with epoxy resin. |
Price:
$8.85
|
|
Current Transducer 0-10A DC In, 0-10V DC Out, DIN MountConverts DC input current into a load independent output signal DC 0-10V. Can be used for monitoring the current in motor windings and with the 0-10V can be easily interfaced to our modules analog inputs. The current transducer features total galvanic isolation between input/output, high accuracy, low drifting by temperature, and wide temperature operational range. |
Price:
$68.30
|
|
Voltage Transducer 0-50V DC In, 0-10V DC Out, DIN MountConverts DC 0-50V input voltage into a load independent output signal DC 0-10V. Can be used for monitoring the voltage in electricity network and with the 0-10V can be easily interfaced to our modules analog inputs. The voltage transducer features total galvanic isolation between input/output, high accuracy, low drifting by temperature, and wide temperature operational range. |
Price:
$68.30
|
|
NTC Sensor 10K EPCOS (TDK) B57703M0103A017 - Ring LugNTC thermistor 10K for temperature measurement with ring lug |
Price:
$11.70
|
|