8 Channel relay board for your Arduino or Raspberry PI - 12V

Product Summary

An 8-channel 12V relay board suited to multi-zone lighting, access control, structured testing systems, and remote power cycling of network gear. The relay module fits neatly in cabinets for industrial automation and home automation alike, with maintained examples from Denkovi.

Features

• Power supply requirement - 12VDC;
• Current consumption - 300mA (when all relays are ON);
• 8 SPDT relay channels (the type depends on the stocks quantity in our store):
  • TONGLING - JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
  • SUNHOLD - RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
• Contact type: Normal Opened (NO), Normal Closed (NC);
• Screw terminals for inputs and outputs;
• PCB parameters : FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask;
• Extra PCB openings for better voltage isolation;
• Doubled high current tracks;
• Protection diode for each relay;
• Input voltage: 3V - 30V (1.5mA max) must be given to the "In" to switch the relay ON;
• May be controlled directly by TTL;
• Green leds for relay status;
• Red led for power;
• Dimensions: 85mm / 150mm / 20mm;
• Mounting holes diameter: 3mm;
• PCB dimensions - here;

Single relay channel schematic

Add the relay board to your Arduino project

Above is given example for 2 relays only. The relay board must be supplied externally with 12VDC.

Add the relay board to your Raspberry PI project

Above is given example for 2 relays only. The relay board must be supplied externally with 12VDC.

Useful links:

• Controlling inductive loads - http://denkovi.com/controlling-inductive-devices

• 

  8 Channel relay board for your Arduino or Raspberry PI - 5V

  A general purpose 8 SPDT channel relay board (power supply 5VDC) for switching high-current electrical loads (both AC and DC) siuch as motors, lights, pumps, contactors and more. With this relay board, any logic-level signal from 3V up to 30V can be used to activate a relay (it may be controlled direclty by microcontroller TTL logic as well). It can be used successfully for example with PIC,AVR,ARM microcontroller, Raspberry PI, Arduino outputs and other.

  Price: $30.95

  View details
• 

  Wi-Fi Wireless Relay Board 8 Channels - Web, Telnet, HTTP API, E-mails

  This is WiFi Wireless 8 channel SPDT relay module (board) for remote management and control with Virtual Serial Port, TCP/IP, Web, HTTP API, Telnet and serial commands access. It has 8 SPDT Relays, 8 digital inputs, 8 analog inputs and one UART port. Inputs can be adjusted to control relays (standalone work). Also inputs of one controller can control outputs of another over the LAN/WAN (box-to-box mode). It can send E-mails on inputs change as well. Suitable for remote control, home automation, data acquisition, sensor processing, alarm systems, PLC applications. Works with Home Assistant, Domoticz and OpenHAB home automation systems as well as with Node-RED IoT platform. Now with FREE Android and iOS App!

  Price: $233.50

  View details
• 

  8 Channel relay board for your Arduino or Raspberry PI - 24V

  A general purpose 8 SPDT channel relay board (power supply 24VDC) for switching high-current electrical loads (both AC and DC) siuch as motors, lights, pumps, contactors and more. With this relay board, any logic-level signal from 3V up to 30V can be used to activate a relay (it may be controlled direclty by microcontroller TTL logic as well). It can be used successfully for example with PIC,AVR,ARM microcontroller, Raspberry PI, Arduino outputs and other.

  Price: $30.95