Currency:
USD
  • USD
  • EUR
  • AUD
  • BRL
  • GBP
  • BGN
  • CAD
  • CNY
  • HRK
  • CZK
  • DKK
  • HKD
  • HUF
  • INR
  • IDR
  • MYR
  • MXN
  • NZD
  • NOK
  • PHP
  • PLN
  • RON
  • RUB
  • SGD
  • ZAR
  • KRW
  • SEK
  • CHF
  • THB
  • TRY
  • JPY
  • AED
  • EGP
  • MDL
  • RSD
  • UAH
Welcome to our store!

Shopping Cart

0 items

Shipping

Registered mail (Posts), table based cost.
DHL Express service, fixed cost at 42.00 USD per order.
GLS, fixed cost at 26.00 USD per order.
DPD, fixed cost at 22.00 USD per order.

Payment

Credit Cards, we accept Visa, MasterCard, Maestro
Paypal, you can place the order directly via our web shop
Wire transfer, please contact with us for Proforma-Invoice

Verified by

website security

For EU Customers

All prices are WITHOUT VAT 20.00%

If you are located in EU and your company has valid VAT number we will reduce the VAT charge AFTER you make the order as our site does not support online VAT number validation. We do it as partial refund. You can use this online tool for VAT validation: http://ec.europa.eu/taxation_customs/vies/

DAE-AN002: How to read DAEnetIP1 analog inputs

This tutorial is about how to read DAEnetIP1 analog inputs

 

 

Quick links

 

 

For which devices is this tutorial

This tutorial may be useful for all customers that have our devices based on DAEnetIP1 controller.

 

Order number
Device name and link
DAEnetIP1 DAEnetIP1
DAEnetIP1 + DAE-RB/Ro4_v2 Internet/Ethernet Four Channel Relay Board
DAEnetIP1 + DAE-RB/Ro8-12V Internet/Ethernet Eight Channel Relay Board - ver.1
DAE-PB-RO12/DI8/AI8 + DAEnetIP1 SNMP and Web based Data Acqusition I/O Module

 

 [back to top]

 

Analog inputs

DAEnetIP1 has 8 analog inputs. They are located on JP4 port. The reference voltage is 2.5V DC. So it is possible to connect to JP4 only voltage from 0V DC up to 2.5V DC. Each analog input channel is with 10 bit resolution. And measures from 0 to 1024.

 

DAEnetIP1 has 8 analog inputs. This is JP4

 

 

DAEnetIP1 JP4 pinouts

 

 

In case you have  combination of DAEnetIP1 and our Peripheral board DAE-PB-RO12/DI8/AI8 it is possible to measure voltage from 0V DC to 10V DC. The JP4 of DAEnetIP1 analog inputs port is connected to JP6 of DAE-PB-RO12/DI8/AI8. So the measured voltage must be connected to some input (Ain1...Ain8) of JP6 of DAE-PB-RO12/DI8/AI8

DAEnetIP1 + DAE-PB-RO12/DI8/AI8 combination. The measured voltage must be connected to JP6 port

 

 

 

DAE-PB-RO12/DI8/AI8 JP6 Pinout

  [back to top]

 

 

Web browser

Bellow are shown steps how to configure and read DAEnetIP1 analog inputs from web browser. In this example we will take analog input 1 (AI1).

  1. Open your browser and type the address of  your DAEnetIP1 device.
  2. Enter the username and password
  3. Go to "ADC"
  4. Set Low Threshold = 200
  5. Set High Threshold = 600
  6. Click "SetThr"
  7. Set Low Hysteresis = 5
  8. Set High Hysteresis = 5
  9. Click "SetHyst"
  10. Set Mode = Low/High
  11. Click "SetMode"
  12. Set Refresh= 1
  13. Click "SetRefresh"

Now the analog input 1 is configurated and you can read it by clicking refresh button of your browser. The rest analog inputs may be read/configurated the same way.

 

  [back to top]

DAEnetIP1 Manager

  1. Open DAEnetIP1 Manager
  2. Type the IP address of your DAEnetIP1 and passowrd (SNMP RW Community)
  3. Click "Refresh" to be sure you are connected.
  4. Go to "ADC"
  5. Set Low Threshold = 200
  6. Set High Threshold = 600
  7. Click "SetThr"
  8. Set Low Hysteresis = 5
  9. Set High Hysteresis = 5
  10. Click "SetHyst"
  11. Set Mode = Low/High
  12. Click "SetMode"
  13. Set Refresh= 1
  14. Click "SetRefr"

Now when you click refresh you will get the value of ADC channel you want. For example on the mage below it is shown AI2=388.

  [back to top]

We accept

 

 

 

Stores

Scroll To Top