Internet/Ethernet 16 Relay Board - IP, SNMP, Web, Home Automation with DAEnetIP2v2

Important Information

This kit (DAEnetIP2 v2 based) is the new (improved) version of Web SNMP controlled 16 Relay Board (DAEnetIP2 based). To see the differences between DAEnetIP2 v2 and its predecessors, please take a look here

Features

• 10/100 Mb Ethernet interface with Link/Activity Led
• Power supply requirements (No protection against overvoltage and inverse polarity) - selectable during purchase:
  • 12VDC / 600 mA
  • 24VDC / 400 mA
• 16 SPDT relay channels (the type depends on the stocks quantity in our store):
  • TONGLING - JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
  • SUNHOLD - RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC) 
• 8 analog inputs with 10 bit resolution (0-3.3VDC)
• 16 (2x8) bit configurable digital I/O port (0-3.3VDC) - in this kit one of the 2 ports is reserved for the relay board
• Dimensions: Relay PCB - 85mm / 150mm / 20mm; DAEnetIP2 - 43mm / 55mm / 15mm
• Standart protocols: ARP, IP, ICMP (ping), DHCP
• Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (integrated web server with autorization)
• Ports for SNMP (161) and HTTP (80) can be changed
• Two MAC addresses protection
• It can be configured with SNMP requests or web browser
• Integrated WEB server for all functions/parameters access. I/O lines labels can be changed via browser
• HTTP API commands for getting/setting the I/O states (with basic access authentication)
• Reset of the relays on incoming/outgoing ping timeout (watchdog function)
• Function "load outputs(relays) states from EEPROM on boot"
• Each I/O line can be named by user via web browser
• It can send traps according analog ADC level
• Analog Inputs may be referred to control the relay according their level
• Possibility of connection analog sensors to the analog inputs as LM34DZ, LM35DZ, LM335, MCP9700A
• Relay PCB parameters: FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask / Extra PCB openings for better voltage isolation / Doubled PCB tracks for better voltage isolation
• Supported by DRMv3 Software - New;
• Software by Denkovi - DRM Software (Windows/Linux), DAE-iModules App for iOS, DAE-aModules App for Android;
• Third party software - more info here;
• Supported by Home Assistant home automation software - New;
• Supported by openHAB home automation software;
• Supported by Domoticz home automation software;
• Supported by Node-RED IoT platform;
• Software examples for PHP, JAVA, .NET and NI LabView and others - here;
• For detailed user manual - here.

Application examples

• Security and fire alarm systems
• Manual or automatic device restart if event occur
• Management/monitoring for industrial
• Sensor information processing
• Remote Lock/unlock doors
• Home automation

The kit includes

• IP controller (Ethernet controller) - DAEnetIP2 v2
• 16 Output Channel SPDT Relay Board (Supply voltage is selectable during purchase: 12VDC or 24VDC)
• Flat ribbon labeled cabel

DAEnetIP2 v2 I/O Ports

		Port JP3 (P3)			Port JP4 (P5)			Port JP5 (P6)
	PIN #	Bit	FUNC	DIR	Bit	FUNC	DIR	Bit	FUNC	DIR
	1	1	Free	I/O	1	Free	I/O	1	Free	Ain
	2	2	Free	I/O	2	Free	I/O	2	Free	Ain
	3	3	Free	I/O	3	Free	I/O	3	Free	Ain
	4	4	Free	I/O	4	Free	I/O	4	Free	Ain
	5	5	Free	I/O	5	Free	I/O	5	Free	Ain
	6	6	Free	I/O	6	Free	I/O	6	Free	Ain
	7	7	Free	I/O	7	Free	I/O	7	Free	Ain
	8	8	Free	I/O	8	Free	I/O	8	Free	Ain
	9	-	GND	PWR	-	3.3V	PWR	-	Vref(+3.3V)	PWR
	10	-	GND	PWR	-	GND	PWR	-	GND	PWR

Legend:

How to connect sensors to DAEnetIP2 v2

More information how to connect different types of sensors to the DAEnetIP2 v2 Analog Port - http://denkovi.com/connecting-analog-sensors-to-daenetip2v2

Access via software DRMv3

This device is supported by DRMv3 Software.

The device can be found in the device list under the default name: DAEnetIP2v2 LAN 16 Relay

Access from Home Assistant

Home Assistant is very powerful home automation system. Please checkout our application note for more information.

Access from OpenHAB

OpenHAB is a third party open source free home automation software. Run your server on Linux, macOS, Windows, Raspberry Pi, PINE64, Docker, Synology... Access it with apps for the web, iOS, Android and others. Use a powerful and flexible engine to design rules, with time and event-based triggers, scripts, actions, notifications and voice control.

The device can be accessed via SNMP requests. More information about the integration with our hardware - http://denkovi.com/openhab-with-denkovi-modules or contact with us.

Access from Domoticz

Domoticz is a free open source popular home automation software which can run on Windows, Linux, MAC, Rasberry PI and others. It is a home automation system design to control various devices and receive input from various sensors. Access it with apps for the web, iOS, Android and others.

More information about how to connect and use it with our hardware - http://denkovi.com/domoticz-with-denkovi-modules or contact with us.

Access from Node-RED

Node-RED is a flow-based programming platform for the Internet of Things (IoT). We prepared small example for communication between Node-RED and our device. More info about Node-RED and denkovi modules: here

You can download the example Node-RED flows from here: SNMP and HTTP

Access DAEnetIP2 v2 from mobile devices

iOS App DAE-iModules

Android App DAE-aModules

The video bellow shows how you can control DAEnetIP2 based device - SNMP 8 Relay Board LM35DZ. Any other Denkovi Ethernet Device from this list can be acessed with same success from your iOS device via DAE-iModules.

 

 

Some useful information about DAE-aModules/DAE-iModules and DAEnetIP2 v2:

• Select device DAEnetIP2v2. You must be sure the IP, UDP Port and SNMP community are correct, otherwise it won't enter into the device
• To connect and scale the analog inputs with sensors, please refer to this link: http://denkovi.com/connecting-analog-sensors-to-daenetip2v2

Control via web browser

In order to access your DAEnetIP2 v2 controller from browser, your web browser have to supports javascript. Just write the IP address of the controller in the address bar and you will see the page, which is integrated in the controller (it has small built in server). The default username/password are admin/admin. Control P5.7 and P5.8 pins.

I/O Ports control/monitor

Traps/P5 control. DAEnetIP2 v2 can send traps if some analog input changes its level bellow/above some threshold (Low/High).
The same logic can be used for setting one of the digital outputs port - JP5 according analog input port JP6.

HTTP API Commands

DAEnetIP2 v2 i/o lines can be controlled/accessed via HTTP API commands and basic access authentication is required to do that.

The digital outputs (P3 and P5) can be controlled by sending this HTTP command:

http://admin:admin@device.ip.address/iochange.cgi?ref=re-io&01=00&02=FF

var IO=new Array (0xFF, 0xFF, 0x80, 
0x00AB, 0x0049, 0x0118, 0x014A, 0x012F, 
0x003E, 0x0029, 0x01DD)

Control DAEnetIP2 v2 via command line

Net-snmp is free command line utility for windows which allows you to execute snmp commands from command line, BAT files, BASH scripts or any other sofwtare that can execute external .exe file or commands from command line. The instructions file how to install net-snmp and example commands can be downloaded from here.

Software Examples

For developers - we can provide examples and support for the following platforms:

Java Example

labVIEW example

VB.NET Express example

Links

• User manual - here
• SNMP definitions file (MIB file) - here
• How to connect sensors to DAEnetIP2 v2 controller itself - here

Denkovi software

• DAE-iModules - App for iOS mobile devices, support link here
• DAE-aModules - App for Android mobile devices, support link here
• DRMv3 Software - software for monitoring, control and configuration - here
• DRM Software - software for controlling relays - here

Third parity software

• Home Assistant - This device is supported by Home Assistant. For more information - please follow this article.
• Domoticz - This device is supported by the powerful home automation system Domoticz. Please take a look at our application note for more information - http://denkovi.com/domoticz-with-denkovi-modules
• openHAB - This device is supported by the powerful home automation system openHAB. Please take a look at our application note for more information. You can also download the configuration files for openHAB (ver 2.2.0) for communication via SNMP requests.
• MyDomoticaHd - Android software by www.phsoftware.altervista.org. Additional explanation how to use the software with our ethernet relays and ip controllers - here: http://denkovi.com/mydomoticahd-with-denkovi-ethernet-relays
• Net-snmp command line tool for windows and C++ library - here
• iReasoning MIB browser (very useful tool) - here

Firmware

Release Date	Current  Version	Mib File	Update Utility	Version History	Note
Nov 2022	1.25	Here	Denkovi Finder	Version History	Instructions how to update - will be sent by request only

Software Examples

Some examples are not public, and the download links will be sent to your email after purchase or by request.

• Node-RED IoT platform - example communication flows in SNMP and HTTP. More about Denkovi modules and Node-RED: here.
• C# .NET Express 2010 - Sets the outputs via snmp v.1 with timeouts
• VB .NET Express 2010 - Very simple demo. It demonstrates how to set and get DAEnetIP2 ports values.
• Java (Netbeans) - Example for accessing DAEnetIP2 controller. Works in Linux / Windows / Mac
• PHP - Example for controlling the 16 digital outputs and reading the ADC (tested with WAMP with snmp)
• labVIEW 2011 -  basic snmp manager for DAEnetIP2 built with labVIEW.
• Node.js (SNMPv1) - example how to communicate with the module using SNMPv1 set/get requests in Node.js.
• Python - Example how to set/get the DAEnetIP2v2 status using SNMP requests

• 

  TSL250R light to voltage sensor

  TSL250R light to voltage optical sensor, photodiode, supply range: 2.7 - 5.5V DC

  Price: $12.40
• 

  HIH-4000-02 humidity sensor, range:0÷100% RH

  Humidity near linear voltage output sensor HIH-4000-02

  Price: $37.00
• 

  LM335Z - temperature sensor, range: -40÷100 C

  Temperature sensor; - 40...+ 100 C

  Price: $4.20
• 

  Infrared Proximity Distance Sensor - Sharp GP2Y0A21YK, 10-80cm

  GP2Y0A21YK is infrared proximity sensor made by Sharp. It has analog output from 3.1V at 10cm to 0.4V at 80cm which make it suitable for using along with our modules

  Price: $21.70
• 

  2.1mm DC Jack to Terminal Tool

  Power supply interconnector jack to terminal tool 2.1 Х 5.5 Х 9mm

  Price: $2.00
• 

  Split Core Current Transformer with 0-5V DC output

  A split core current transformer which is able to produce a 0-5V DC signal with an AC primary current (from 5 to 50A selectable). The split core allows the transformer to be clipped on to a wire without disconnecting the primary current carrying wire.

  Price: $18.30

  View details
• 

  SUNNY SYS1541-2412 Switching AC Power Adapter 12V/2A Out

  This is power supply adapter suitable for all denkovi 12VDC devices. Its AC plug may be changed, so please specify the type of the plug you want to use and we will send it with this AC plug. We offer AC plugs for USA, UK, AUS and EU.

  Price: $26.40

  View details
• 

  SUNNY DC Power Cable Spliter 1x3

  A DC power cable spliter 1x3, suitable for all our products with power jack 2.1mm

  Price: $6.50
• 

  Mean Well LRS-35-12 Single Output Switching Power Supply 12V/3A Output

  A 35W single-output enclosed type power supply with 30mm of low profile design. Input range is 85-264VAC, output is 12VDC / 3A. Suitable for all 12V Denkovi devices.

  Price: $28.60